Connectors & cables
Connectors & cables
Connectors and cables are the interconnect between a display and your host hardware — the FPC/FFC tails, mating connectors, and cable assemblies that carry signal and power to the panel. They are the small pieces that decide whether a bench prototype comes up on the first attempt or spends a day chasing a wrong pitch, a reversed FPC, or a cable that will not reach.
Connector and cable specifications
Standard connectors, transfer boards, and cable assemblies for the display range. For a custom length or orientation, start a custom project.
- Connector types / pitch / pin counts: FPC/FFC connectors and transfer boards — FPC241H-040G10M (40-pin TFT FPC connector) and OD-TFT40-0.5mm (0.5 mm-pitch TFT transfer board for all TFT LCD modules)
- Cable types / lengths / assemblies: flat-flex and discrete cables at standard pitches — FFC-1.0-10P-TM-20CM (1.0 mm, 10-pin, 200 mm), CAB-1.25-4P-TM-20CM (1.25 mm, 4-pin, 200 mm), CAB-HY2.0-8P-TM-20CM (2.0 mm, 8-pin, 200 mm), plus a USB-to-UART/RS232/RS485 test board (PCB-USBto232/485)
- Interface coverage: parallel (8080/6800), SPI, I²C, RGB, MIPI, LVDS, and HDMI
- Custom builds: custom-length cable assemblies, non-standard connector orientations, and pigtails from a panel FPC to a mating host connector on request
Where it fits
Typical applications: connecting a panel to a control board or host PCB, bench wiring during evaluation and bring-up, production interconnect, and short pigtails from a panel FPC to a mating connector.
How it differs: connectors and cables are the interconnect only, not the driver electronics — demo / eval boards and control boards are the driver hardware, and a PCB is the board that carries them. Match the connector to your panel's interface and pitch before ordering; for background on which interface fits your host, see the knowledge base.
Connectors, transfer boards, and test adapters
Learn more before you buy
Background on connectors, pinouts, and matching an interface.
Display Connector and Pinout Basics
Reading a panel's connector, pin functions, and what to match on the host side.
Read the guideChoosing a Display Interface
Bandwidth, host support, and a decision guide for picking an interface.
Read the guideDisplay Interfaces Explained
SPI, I2C, RGB, LVDS, and MIPI-DSI — how each interface is wired.
Read the guideDisplay Interface Quick Reference
A compact table for matching a panel's interface and pin count to a cable.
Read the guideReady to spec a connector or cable?
Send us the panel's FPC pitch and pin count, the host connector, and the length you need — we will match a standard part or build a custom assembly or pigtail.