Medical Devices
Medical devices
Displays built for medical device programs
Medical displays are typically used in patient monitors, diagnostic and IVD instruments, point-of-care and handheld devices, and surgical and imaging systems.
Where our displays go in medical equipment
Medical programs run on long design cycles, multi-year part availability, and readouts that stay legible in the conditions the device is used in. We match the display to those constraints and support the engineering from part selection through production.
Patient monitoring
High-brightness IPS panels with wide viewing angles and optical bonding for bedside and transport monitors that must read clearly across a room and off-axis.
Diagnostics & IVD
Color TFT modules for benchtop analyzers and in-vitro diagnostic instruments, tailored to the interface, brightness, and touch integration the instrument needs.
Point-of-care & handheld
Low-power, sunlight-readable, ruggedized displays for portable and point-of-care devices used outside a controlled room, including wide-temperature operation.
Surgical & imaging
High-resolution, color-consistent panels with optical bonding for surgical carts and imaging peripherals where readability under bright OR lighting matters.
Device classes and the engineering behind them
OD has engineered custom displays for medical and diagnostic equipment across the device classes below, built to the durability, clarity, and cleanability those environments demand.
Device categories we've engineered displays for:
Engineering we typically bring to these programs:
The quality system a medical buyer qualifies against
What Orient Display holds today. Marked in amber: the medical-grade standards a device program may require that are not yet substantiated for these modules. Nothing in amber is a held certification.
ISO 13485: medical device quality management
Orient Display operates an ISO 13485 quality management system for medical device work. The certification is held today. It governs document control, traceability discipline, and change management across the build. The current certificate, with its scope and validity, is provided on request.
General quality and compliance certifications we hold, applied across all industries. Current certificates and declarations are provided on request:
Medical-grade standards a device program may require. Not substantiated for these modules today and not to be read as met:
Medical QMS mechanics a buyer may ask for are also unconfirmed for these modules: design controls with Device History File (DHF/DMR) support, a validated CAPA system, and IQ/OQ/PQ process validation. Holding ISO 13485 is not the same as meeting medical-grade device standards; those remain to be proven per program.
See all certifications and quality documentation →What a medical qualification asks of the display supplier
The constraints a medical device program brings to a display, and where Orient Display's proven capability meets them. Anything not yet substantiated for medical use is marked in amber.
Environmental & optical
- Sunlight-readable IPS variants and high-brightness backlighting for bright-room and outdoor use
- Wide-temperature operation for transport and point-of-care devices
- Ruggedized construction, waterproofing options, and optical bonding for durability and legibility
- Disinfectant- and chemical-resistant cover glass for repeated clinical cleaning
- Antimicrobial surface coatings
- Autoclave, wash-down, and sealed ingress-rated tolerance
Documentation & traceability
- Full specifications, application notes, evaluation-kit instructions, and driver-IC specs on request
- Samples and engineering support from part selection through production
- Lot traceability records kept for 10 years
- Design History File (DHF) and regulatory-submission documentation contribution (510(k))
- Material certifications and biocompatibility test reports for submission
Regulatory & process
- RoHS and REACH material compliance and UL listing as a baseline
- Design-in from a standard module, guided by our engineering team, to a manufacturable spec
- Medical-grade electrical safety to IEC 60601-1 and DICOM Part 14 for imaging
- A 6-month PCN notice before any product change, and a BOM lock on request: no component or process change without your written approval
- Design-transfer protocol for a medical program
Non-China country-of-origin options, by tier
For programs with sourcing constraints, four escalating country-of-origin paths. This is a manufacturing capability offered across every industry.
Non-China-origin shipping
Production in Thailand or Malaysia using Chinese components, shipping from a non-China origin.
COO-qualifying
A build configured so a Certificate of Origin can be issued for the finished module.
Zero-China-factor
Production through a Taiwan partner with no Chinese bill-of-materials content.
NCNT on request
A No-China, No-Taiwan sourcing path available on request for the most constrained programs.
Built for the length of your program
Hardware programs run long qualification cycles and long production lives. We plan the engagement around that.
Long design-in cycle
We support the extended qualification and design-in cycle a hardware program runs, from concept spec to production release.
10-year availability
Once a module is designed in, we commit to 10-year availability, so a qualified display does not force a mid-cycle redesign.
Long-lived supplier
An established manufacturer that will still be here across the product's service life, so a designed-in display keeps its source.
Specs & samples on demand
Full specifications, application notes, evaluation kits, and driver-IC documentation available to your engineers.
24-hour US sample shipping
Samples ship from the US within 24 hours, so evaluation starts without an overseas wait.
Globally based engineering
In-house engineers work with the factory on part selection, touch integration and initialization.
Our written commitments to a medical program
A device qualified on our display should not be pushed into a redesign or an unplanned requalification. These are the terms we commit to in writing.
10-year availability
10-year availability for a designed-in module, so a qualified display does not force a mid-cycle redesign.
6-month PCN notice
A 6-month PCN notice before any product change.
12-month EOL notice
A 12-month EOL notice before a product is discontinued.
6-month last-time buy
A 6-month last-time-buy window after an EOL notice.
BOM lock on request
A BOM lock on request: no component or process change without your written approval.
10-year lot traceability
Lot traceability records kept for 10 years.
Medical buyer FAQ
Do you hold ISO 13485?
Yes. Orient Display operates an ISO 13485 quality management system for medical device work today, alongside ISO 9001 and QC 080000 as general quality certifications. Current certificates are provided on request.
Can you supply sunlight-readable or wide-temperature variants?
Yes. Sunlight-readable IPS panels, high-brightness backlighting, wide-temperature operation, ruggedization, waterproofing, and optical bonding are all standard custom capabilities.
Are your displays medical-grade to IEC 60601-1 and DICOM?
Orient Display holds ISO 13485. Medical-grade electrical safety to IEC 60601-1 and DICOM Part 14 grayscale calibration are not substantiated for these modules today. We will not represent a display as medical-grade until those are met and documented. Tell us the specific standard your device must satisfy.
What are your lead times for samples and custom production?
Samples typically ship in 3–6 weeks and production runs in 4–8 weeks, depending on configuration; US samples ship within 24 hours where stocked.
Can you supply non-China country-of-origin for a medical program?
Yes, as a capability: four escalating tiers, from non-China-origin shipping to a No-China, No-Taiwan path on request. See the de-risking section above.
Do you support DHF and regulatory-submission documentation?
Design History File (DHF) contribution and regulatory-submission documentation support (510(k), material and biocompatibility certifications) are not yet confirmed for these modules. Raise your documentation requirements with us and we will tell you what we can support today.
What lifecycle and change-control terms do you commit to?
In writing: 10-year availability, a 6-month PCN notice before any product change, a 12-month EOL notice, a 6-month last-time-buy window after an EOL notice, a BOM lock on request (no component or process change without your written approval), and lot traceability records kept for 10 years. See the lifecycle & change-control policy.
Start your medical display project
Tell us the device, the environment, and the standards it must meet. Our engineers will help you specify the right module before you commit.