Industrial Controls
Industrial HMI panel on a plant floor, operator at a control cabinet · full-bleed
Industrial controls & IoT
Displays built for the plant floor and the field
Custom display manufacturer with in-house US engineering support, building rugged, sunlight-readable modules for industrial control, factory-automation, and IIoT equipment from concept spec through production.
Where our displays go in control and automation equipment
Industrial equipment runs for years in heat, vibration, and glare, on interfaces an operator has to read at a glance. We match the display to those constraints and support the engineering from part selection through production — not a catalog part dropped into a control cabinet.
Operator HMI panel on a control cabinet
PLC & HMI panels
Color TFT and capacitive touch modules for programmable-logic-controller front panels and operator HMIs, with high-brightness backlighting and glove- or stylus-friendly touch for shop-floor use.
Machine-mounted terminal on a production line
Factory-automation displays
Sunlight-readable IPS panels and optical bonding for machine-mounted terminals and line-side readouts that must stay legible under bright plant lighting and off-axis viewing.
Process-control metering instrument
Process control & instrumentation
Character, graphic, and monochrome OLED displays for metering, test-and-measurement, and process-control instruments where a crisp, stable readout matters more than resolution.
Edge IIoT gateway with a small display
Industrial IoT gateways
Low-power TFT, OLED, and reflective e-paper for edge gateways, connected sensors, and IIoT nodes — small formats tuned for long duty cycles and continuous operation.
Device classes and the engineering behind them
OD has engineered custom displays for industrial control and automation equipment across the device classes below, built for the durability, readability, and long service life those environments demand.
Device categories we've engineered displays for:
Engineering we typically bring to these programs:
The quality system an industrial buyer qualifies against
What Orient Display holds today, stated plainly — and, marked in amber, the industrial safety, EMC, and ingress standards a piece of equipment may require that are not yet substantiated for these modules. Nothing amber should be read as a held certification.
ISO 9001 and QC 080000 — quality management, held today
Orient Display holds ISO 9001 and QC 080000, with RoHS and REACH material compliance and UL listing, applied across all industries. These govern document control, traceability, and change management across the build; industrial safety and EMC standards below are program-specific and not yet substantiated for these modules.
Quality and compliance certifications we hold today, applied across all industries:
Industrial equipment standards a program may require — not substantiated for these modules today, and not to be read as met:
Industrial-grade construction attributes a buyer may ask for — also unconfirmed for these modules: extended industrial temperature grade to a specified −40 °C to +85 °C range, conformal coating for condensing or corrosive environments, and qualified shock and vibration tolerance to a named test profile. Holding general quality certifications is not the same as meeting industrial safety or EMC standards; those remain to be proven per application.
See all certifications and quality documentation →What an industrial qualification asks of the display supplier
The constraints a control, automation, or IIoT program brings to a display, and where Orient Display's proven capability meets them — with anything not yet substantiated for industrial use marked in amber, never implied.
Environmental & optical
- Sunlight-readable IPS variants and high-brightness backlighting for bright-plant and outdoor equipment
- Wide-temperature operation for cabinet, machine-mount, and field use
- Ruggedized construction, waterproofing options, and optical bonding for durability and legibility
- Capacitive and resistive touch tuned for gloved, wet, or stylus operation
- IP65/IP67 sealed-front assemblies for washdown and dust-laden lines
- Extended industrial temperature grade to a named −40 °C to +85 °C spec
Documentation & traceability
- Full specifications, application notes, evaluation-kit instructions, and driver-IC specs on request
- Samples and engineering support from part selection through production
- Component-level traceability and product genealogy to an industrial buyer's standard
- Locked-BOM guarantees and PCN change-control notification
- Material and RoHS/REACH declarations for a formal supplier-qualification pack
Regulatory & process
- RoHS and REACH material compliance and UL listing as a baseline
- Design-in from a standard module, guided by our engineering team, to a manufacturable spec
- Control-equipment electrical safety to UL 61010-1 / IEC 61010-1
- EMC and immunity to IEC 61326-1 and the IEC 61000-4 series
- ATEX / IECEx construction for hazardous-area equipment
Non-China country-of-origin options, by tier
For programs with sourcing constraints, four escalating country-of-origin paths — a manufacturing capability offered across every industry, at capability level.
Non-China-origin shipping
Production in Thailand or Malaysia using Chinese components, shipping from a non-China origin.
COO-qualifying
A build configured so a Certificate of Origin can be issued for the finished module.
Zero-China-factor
Production through a Taiwan partner with no Chinese bill-of-materials content.
NCNT on request
A No-China, No-Taiwan sourcing path available on request for the most constrained programs.
Built for the length of your program
Hardware programs run long qualification cycles and long production lives. We plan the engagement around that.
Long design-in cycle
We support the extended qualification and design-in cycle a hardware program runs, from concept spec to production release.
Multi-year part retention
Once a module is designed in, we hold it in production across the product's life, so a qualified display does not force a mid-cycle redesign.
Long-lived supplier
An established manufacturer that will still be here across the product's service life, so a designed-in display keeps its source.
Specs & samples on demand
Full specifications, application notes, evaluation kits, and driver-IC documentation available to your engineers.
24-hour US sample shipping
Samples ship from the US within 24 hours, so evaluation starts without an overseas wait.
US engineering support
In-house US engineers guide part selection, touch integration, and initialization alongside the factory.
Industrial buyer FAQ
Can you supply sunlight-readable or wide-temperature variants?
Yes. Sunlight-readable IPS panels, high-brightness backlighting, wide-temperature operation, ruggedization, waterproofing, and optical bonding are all standard custom capabilities for control, automation, and field equipment.
Which certifications do you hold?
Orient Display holds ISO 9001 and QC 080000 quality-management certifications, with RoHS and REACH material compliance and UL listing, applied across all industries. See our certifications page for the full list and documentation.
Are your displays rated to UL 61010-1, IEC 61326 EMC, or an ATEX hazardous-area standard?
Control-equipment safety to UL 61010-1 / IEC 61010-1, EMC and immunity to IEC 61326-1 and IEC 61000-4, and ATEX / IECEx hazardous-area construction are not substantiated for these modules today — we will not represent a display as certified to them until it is proven and documented. Tell us the standard your equipment must satisfy and we will scope what is achievable.
Can you meet a specific IP ingress rating or an industrial temperature grade?
A sealed IP65/IP67 front and an extended −40 °C to +85 °C industrial temperature grade depend on the assembly and are not pre-qualified on these modules — bring your target rating and we will tell you what we can build to today.
What are your lead times for samples and custom production?
Samples typically ship in 3–6 weeks and production runs in 4–8 weeks, depending on configuration; US samples ship within 24 hours where stocked.
Can you supply non-China country-of-origin for an industrial program?
Yes, as a capability — four escalating tiers from non-China-origin shipping through a No-China, No-Taiwan path on request. See the de-risking section above.
Customers we manufacture for
Plant-floor control scene · CTA background
Start your industrial display project
Tell us the equipment, the environment, and the standards it must meet. Our US engineers will help you specify the right module before you commit.