Blog
Types of TFT LCD Technology
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) dominates the world flat panel display market now. Thanks for its low cost, sharp colors, acceptable view angles, low power consumption, manufacturing friendly design, slim physical structure etc., it has driven CRT(Cathode-Ray Tube) VFD ( Vacuum Fluorescent Display) out of market, squeezed LED (Light Emitting Diode) displays only to large size display area. TFT LCD displays find wide applications in TV, computer monitors, medical, appliance, automotive, kiosk, POS terminals, low end mobile phones, marine, aerospace, industrial meters, smart homes, handheld devices, video game systems, projectors, consumer electronic products, advertisement etc. For more information about TFT displays, please visit our knowledge base.
What we are talking about TFT LCD, it is a LCD that uses TFT technology to improve image qualities such as addressability and contrast. A TFT LCD is an active matrix LCD, in contrast to passive matrix LCDs or simple, direct-driven LCDs with a few segments without TFT in each pixel.
There are many types of TFT LCD Technology. Different TFT LCD technology has different characters and applications.
TN (Twisted Nematic) Type
The TN type TFT LCD display is one of the oldest and lowest cost type of LCD display technology. TN TFT LCD displays have the advantages of fast response times, but its main advantages are poor color reproduction and narrow viewing angles. Colors will shift with the viewing angle. To make things worse, it has a viewing angle with gray scale inversion issue. Scientist and engineers took great effort trying to resolve the main genetic issues. Now, TN displays can look significantly better than older TN displays from decades earlier, but overall TN TFT LCD display has inferior viewing angles and poor color in comparison to other TFT LCD technologies.
IPS (In-plane switching) Type
IPS TFT LCD display was developed by Hitachi Ltd. in 1996 to improve on the poor viewing angle and the poor color reproduction of TN panels. Its name comes from its in-cell twist/switch difference compared with TN LCD panels. The liquid crystal molecules move parallel to the panel plane instead of perpendicular to it. This change reduces the amount of light scattering in the matrix, which gives IPS its characteristic of much improved wide viewing angles and color reproduction. But IPS TFT display has the disadvantages of lower panel transmission rate and higher production cost compared with TN type TFT displays, but these flaws can’t prevent it to be used in high end display applications which need superior color, contrast, viewing angle and crispy images.
MVA (Multi-Domain Vertical Alignment) Type
Fujitsu invented Multi-domain Vertical Alignment (MVA) technology.
The mono-domain VA technology is widely used for monochrome LCD displays to provide pure black background and better contrast, its uniformly alignment of the liquid crystal molecules makes the brightness changing with the viewing angle.
MVA solves this problem by causing the liquid crystal molecules to have more than one direction on a single pixel. This is done by dividing the pixel into two or four regions – called domains – and by using protrusions on the glass surfaces to pretilt the liquid crystal molecules in the different directions. In this way, the brightness of the LCD display can be made to appear uniform over a wide range of viewing angles.
MVA is still used in some applications but it is gradually replaced by IPS TFT LCD Display.
AFFS (Advanced Fringe Field Switching) Type
This is an LCD technology derived from the IPS by Boe-Hydis of Korea. Known as fringe field switching (FFS) until 2003, advanced fringe field switching is a technology similar to IPS offering superior performance and color gamut with high luminosity. Color shift and deviation caused by light leakage is corrected by optimizing the white gamut, which also enhances white/grey reproduction. AFFS is developed by Hydis Technologies Co., Ltd, Korea (formally Hyundai Electronics, LCD Task Force).
In 2004, Hydis Technologies Co., Ltd licensed its AFFS patent to Japan’s Hitachi Displays. Hitachi is using AFFS to manufacture high end panels in their product line. In 2006, Hydis also licensed its AFFS to Sanyo Epson Imaging Devices Corporation. (Reference)
The AFFS is similar to the IPS in concept; both align the crystal molecules in a parallel-to-substrate manner, improving viewing angles. However, the AFFS is more advanced and can better optimize power consumption. Most notably, AFFS has high transmittance, meaning that less of the light energy is absorbed within the liquid crystal layer and more is transmitted towards the surface. IPS TFT LCDs typically have lower transmittances, hence the need for the brighter backlight. This transmittance difference is rooted in the AFFS’s compact, maximized active cell space beneath each pixel.
AFFS has been used in high end LCD applications, like high end cell.phone because of its superb contrast, brightness and color stability.
If you have any questions about Orient Display technologies and products, feel free to contact our engineers for details.
Reference:
Related articles:
How to choose a TFT LCD Display Module?
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) dominates the world flat panel display market now. Thanks for its low cost, sharp colors, acceptable view angles, low power consumption, manufacturing friendly design, slim physical structure etc., it has driven CRT(Cathode-Ray Tube) VFD ( Vacuum Fluorescent Display) out of market, squeezed LED (Light Emitting Diode) displays only to large size display area. TFT LCD displays find wide applications in TV, computer monitors, medical, appliance, automotive, kiosk, POS terminals, low end mobile phones, marine, aerospace, industrial meters, smart homes, handheld devices, video game systems, projectors, consumer electronic products, advertisement etc. For more information about TFT displays, please visit our knowledge base.
There a lot of considerations for how to choose a most suitable TFT LCD display module for your application. Please find the check list below to see if you can find a right fit.
Size
- It is the start point for every project. There are two dimensions to consider: outside dimension (width, height, thickness) and AA (active area or pixel area). Orient Display’s standard product line ranges from 1.0” to 32”. Our OLED size can go down to 0.66” which fit for wearable devices.
Resolution
- Resolution will decide the clearance. Nobody likes to see a display showing pixel clearly. That is the reason for better resolution, going from QVGA, VGA to HD, FHD, 4K, 8K. But higher resolution means higher cost, power consumption, memory size, data transfer speed etc. Orient Display offers low resolution of 128×128 to HD, FHD, we are working on providing 4K for our customers. For full list of resolution available, please see Introduction: LCD Resolution
Aspect Ratio or Orientation
- Orientation of either landscape or portrait has to be taken into consideration. Beside Aspect Ratio is also very important. You might be satisfied with 4:3 in the past, now, you might be willing to trying wider screen like 16:9 or even 21:9.
Brightness
- TFT screen brightness selection is very important. You don’t want to be frustrated by LCD image washout under bright light or you drain the battery too fast by selecting a super brightness LCD but will be used indoor only. There are general guidance listed in the table below.
Orient Display offers standard brightness, medium brightness , high brightness, and high end sunlight readable IPS TFT LCD display products for our customers to choose from.
Viewing Angle
- If the budget is tight, TN type TFT LCD can be chosen but there is viewing angle selection of either 6 o’clock or 12 o’clock. Gray scale inversion needs to be taken of carefully. If a high-end product is designed, you can pay premium to select IPS TFT LCD which doesn’t have the viewing angle issue.
Contrast Ratio
- It is similar to viewing angle selection, TN type TFT LCD has lower contrast but lower cost, while IPS TFT LCD has much high contrast but normally with higher cost. Orient Display provides both selections.
Temperature
- Normal TFT LCD displays provide wide enough temperature range for most of the applications. -20 to 70oC. But there are some (always) outdoor applications like -30 to 80oC or even wider, special liquid crystal fluid has to be used. Heater is needed for operating temperature requirement of -40oC. Normally, storage temperature is not an issue, many of Orient Display standard TFT display can handle -40 to 85oC, if you have any questions, feel free to contact our engineers for details.
Power Consumption
- Power consideration can be critical in some hand-held devices. For a TFT LCD display module, backlight normally consumes more power than other part of the display. Dimming or totally shutdown backlight technology has to be used when not in use. For some extreme power sensitive application, sleep mode or even using memory on controller consideration has to be in design. Feel free to contact our engineers for details.
Interface
Orient Display provides a wide variety of interfaces, HDMI, RGB, LVDS, MIPI, SPI, RS232 and Parallel MCU(6800,8080).
- Genetic Interfaces: Those are the interfaces which display or touch controller manufacturers provide, including parallel, MCU, SPI(,Serial Peripheral Interface), I2C, RGB (Red Green Blue), MIPI (Mobile Industry Processor Interface), LVDS (Low-Voltage Differential Signaling), eDP ( Embedded DisplayPort) etc. Orient Display has technologies to make the above interface exchangeable.
- High Level Interfaces: Orient Display has technologies to make more advanced interfaces which are more convenient to non-display engineers, such as RS232, RS485, USB, VGA, HDMI etc. more information can be found in our serious products. TFT modules, Arduino TFT display, Raspberry Pi TFT display, Control Board.
Touch Panel
Touch panels have been a much better human machine interface which become widely popular. Orient Display has been investing heavy for capacitive touch screen sensor manufacturing capacity. Now, Orient Display factory is No.1 in the world for automotive capacitive touch screen which took around 18% market share in the world automotive market.
Orient can provide the traditional GG (Glass Glass) touch screen, OGS (One Glass Solution) touch screen, and PG (Plastic Glass) touch screen.
Based on the above three types of touch panel technology, Orient Display can also add different kinds of features like different material glove touch, water environment touch, salt water environment touch, hover touch, 3D (force) touch, haptic touch etc. Orient Display can also provide from very low cost fixed area button touch, single (one) finger touch, double finger (one finger+ one gesture) touch, 5 finger touch, 10 points touch or even 16 points touch
Considering the different shapes of the touch surface requirements, Orient Display can produce different shapes of 2D touch panel (rectangle, round, octagon etc.), or 2.5D touch screen (round edge and flat surface) or 3D (totally curved surface) touch panel.
Considering different strength requirements, Orient Display can provide low cost chemical tampered soda-lime glass, Asahi (AGC) Dragontrail glass and Corning high end Gorilla glass. With different thickness requirement, Orient Display can provide the thinnest 0.5mm OGS touch panel, to thickness more than 10mm tempered glass to prevent vandalizing, or different kinds of plastic touch panel to provide glass piece free (fear) or flexible substrates need.
Of course, Orient Display can also offer traditional RTP (Resistive Touch Panel) of 4-wire, 5-wire, 8-wire through our partners, which Orient Display can do integration to resistive touch screen displays.
Fully, Partial or Semi-Custom Solution
If you can’t find a very suitable TFT LCD Display in our product line, don’t be discouraged. The products listed on our website is only small part of standard products. We have thousands of standard products in our database, feel free to contact our engineers for details.
If you like to have a special display, Orient Display is always flexible to do partial custom solution. For example, to modify the FPC to different length or shape, or use as fewer pinouts as possible, or design an ultra-bright LCD display, or a cover lens with your company logo on it, or design an extreme low power or low cost TFT display etc. our engineers will help you to achieve the goals. The NER cost can start from hundreds of dollars to Thousands. In rare case, it can be tens of thousands of dollars.
A fully custom TFT LCD panel can have very high NRE cost. Depending on the size of the display, quantity and which generation production line to be used. The tooling cost can start from $100,000 to over $1M.
If you have any questions about Orient Display technologies and products, feel free to contact our engineers for details.
Related articles:
Pros and Cons of TFT Displays
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) we are talking here is TN (Twisted Nematic) type TFT displays which is align with the term in the TV and computer market. Now, TFT displays have taken over the majority of low-end color display market. They have wide applications in TV, computer monitors, medical, appliance, automotive, kiosk, POS terminals, low end mobile phones, marine, aerospace, industrial meters, smart homes, consumer electronic products etc. For more information about TFT displays, please visit our knowledge base.
Talking about Pros and Cons of TFT displays, we need to clarify which display they are compared to. To some displays, TFT displays might have advantages, but compared with another display, the same character might become the disadvantages of TFT displays. We will try our best to make clear as below.
Pros of TFT Displays
- Less Energy Consumption: Compared with CRT(Cathode-Ray Tube) VFD ( Vacuum Fluorescent Display) and LED (Light Emitting Diode) display, which made laptop possible.
- Good visibility and color: Compared with old CSTN (Color Super Twisted Nematic) or passive LCDs
- Good response time and viewing angle: Compared with old CSTN or passive LCDs
- Good cost: Compared with high end IPS (In-Plane Switching) LCD displays, AMOLED (Active Matrix Organic LED) displays and recent micro-LED display.
- Excellent physical design. TFT displays are very easy to design and integrated with other components, such as resistive and capacitive touch panels (RTP, CTP, PCAP) etc.
- Minimum Eye Strain: Because TFT panel itself doesn’t emit light itself like CRT, LED, VFD. The light source is LED backlight which is filtered well with the TFT glass in front for the blue light.
- Space efficient design (can be placed anywhere in your workspace on a rotational mount so you can turn it in all directions).
Cons of TFT Displays
- More Energy Consumption: Compared with monochrome displays and OLED (PMOLED and AMOLED) display, which makes TFT displays less attractive in wearable device.
- Poor color saturation: Compared with IPS LCD displays and AMOLED displays.
- Poor response time and viewing angle: Compared with IPS LCD displays, AMOLED displays and recent micro-LED display. TFT displays still need to note viewing angle of 6 o’clock or 12 o’clock in the datasheet and still have the gray scale inversion issue.
- High tooling cost: Depending on which generation production line to produce and also depending on its size. Building a TFT display fab normally need billions of dollars. For a big size display which needs high generation production line to produce. The NRE cost can be millions dollars.
- Sunlight Readability: Because it is very expensive to produce transflective TFT LCD displays, in order to be readable under the sunlight, very bright LED backlight (> 1,000 nits) has to be used. The power needed is high and also need to deal with heat management. If used together with touch panel, expensive optical bonding (OCA or OCR) and surface treatment (AR, AF) technologies have to be used.
If you have any questions about Orient Display technologies and products, feel free to contact our engineers for details.
Related Articles:
How to select ARM Processors
How to select ARM Processors
Introduction
The widest range of microprocessor cores for almost all application markets. Explore ARM. Performance, power & cost requirements for almost all application markets, processors are crucial. The system performance depends heavily on its hardware; this article will guide you through a study of the ARM Processor and be of great assistance in your decision-making.
A Brief Introduction to ARM
Figure 1. ARM Processors Roadmap
Before 2003, there are classic ARM Processors which are including ARM7(ARMv4 Architecture), ARM9(ARMv5 Architecture), ARM11(ARMv6 Architecture). ARM7 has no MMU (memory management unit), cannot run multi-user multi-process system such as Linux and WinCE. Only can run system such as ucOS and ucLinux which do not need MMU. ARM9 and ARM11 are embedded CPUs with MMU, which can run Linux.
After 2003, When it came to the ARMv7 architecture, it was named after Cortex and divided into three series: Cortex-A, Cortex-R, and Cortex-M.
- Cortex-A — application processor cores for a performance-intensive systems
- Cortex-R – high-performance cores for real-time applications
- Cortex-M – microcontroller cores for a wide range of embedded applications
Simply put, Cortex-A series are suitable for applications that have high computing requirements, run rich operating systems, and provide interactive media and graphics experience. Cortex-R are suitable for that require reliability, high availability, fault tolerance, maintainability and real-time response. Cortex-M series are aimed at cost and power-sensitive MCUs and end applications.
Cortex-A VS Cortex-R VS Cortex-M
Cortex-A
The Cortex-A category of processors is dedicated to Linux and Android devices. Any devices – starting from smartwatches and tablets and continuing with networking equipment – can be supported by Cortex-A processors.
- Cortex-A processors (A5, A7, A8, A9, A12, A15 and A17) is based on the ARMv7-A architecture
- The set of common features for A-processors includes a media processing engine (NEON), a tool for security purposes (Trustzone), and various supported instruction sets (ARM, Thumb, DSP etc.)
- The main features of Cortex-A processors are top performance and brilliant power efficiency closely bundled to provide users with the best service possible
The main characteristics of Cortex-A processor:
Cortex-A5: The Cortex A5 is the smallest and lowest power member of the Cortex A series, but it can still demonstrate multicore performance, it is compatible with A9 and A15 processors.
Cortex-A7: The power consumption of A7 is nearly the same as A5, But the performance provided by the A7 is 20% higher than A5 as well as full architectural compatibility with Cortex-A15 and Cortex-A17. The Cortex-A7 is an ideal choice for cost -sensitive smartphone and tablet implementations.
Contrex-A15: The Cortex-A15 is the highest performance member of this series, providing twice the performance than A9. A15 finds its application in high-end devices, low-power servers, and wireless infrastructure. This is the first processor support for data management and virtual environment solutions.
Contrex-A17: The Cortex-A17 demonstrates 60% higher performance than that of the A9. The main aim is satisfying the needs of premium-class devices.
Contrex-A50: Contrex-A50, latest series, are built on the ARMv8 architecture and bring with them support for Arch64-bit an energy-efficient system. An obvious reason for the move to 64-bit is the support of more than 4GB of physical memory, which is already achieved on Cortex-A15 and Cortex-A7.
Cortex-R
Cortex-R processors target high-performance real-time applications such as hard disk controllers, networking equipment media players, and other similar devices, Furthermore, it also great support for the automotive industry such as airbags, braking systems and engine management.
Cortex-R4: Cortex-R4 is well suited for automotive applications. It can be clocked up to 600 MHz, has an 8-stage pipeline with dual-issue, pre-fetch and a low latency interrupt system making it ideal for safety critical systems.
Cortex-R5: Cortex-R5 extends features offered by R4 and adding increased efficiency, reliability and enhance error management. The dual-core implementation makes it possible to build very powerful, flexible systems with real-time responses.
Cortex-R7: The Cortex-R7 significantly extends the performance. They feature an 11-stage pipeline and enable both out-of-order execution and high-level branch prediction. Tools can be implemented for lock-step, symmetric, and asymmetric multiprocessing. The generic interrupt controller is another significant feature that should be mentioned.
Cortex-M
Cortex-M designed specifically to target MCU market. The Cortex-M series is built on the ARMv7-M architecture (used for Cortex-M3 and Cortex-M4), and the smaller Cortex-M0+ is built on the ARMv6-M architecture. It is safe to say that the Cortex-M has become for the 32-bit world what the 8051 is for the 8-bit – an industry-standard core supplied by many vendors. The Cortex-M series can be implemented as a soft core in an FPGA, for example, but it is much more common to find them implemented as MCU with integrated memories, clocks and peripherals. Some are optimized for energy efficiency, some for high performance and some are tailored to a specific market segment such as smart metering
For applications that are particularly cost sensitive or are migrating from 8-bit to 32-bit, the smallest member of the Cortex-M series might be the best choice.
Cortex-M0: The Cortex-M0+ uses the Thumb-2 instruction set and has a 2-stage pipeline. Significant features are the bus for single-cycle GPIO and the micro trace buffer.
Cortex-M3&M4: The Cortex-M3 and Cortex-M4 are very similar cores. Each offers a 3-stage pipeline, multiple 32-bit busses, clock speeds up to 200 MHz and very efficient debug options. The significant difference is the Cortex-M4 core’s capability for DSP. The Cortex-M3 and Cortex-M4 share the same architecture and instruction set (Thumb-2). If your application requires floating point math, you will get this done considerably faster on a Cortex-M4 than you will on a Cortex-M3. That said, for an application that is not using the DSP or FPU capabilities of the Cortex-M4, you will see the same level of performance and power consumption on a Cortex-M3. In other words, if you need DSP functionality, go with a Cortex-M4. Otherwise, the Cortex-M3 will do the job.
Conclusion
Figure 2. Cortex overview
ARM processors offer a variety of capabilities for different purposes. With a little bit of thought and investigation, you will be able to find the right processor that suits your application needs. whether it’s for a high-end tablet or an ultra-low-cost wireless sensor node.
It is a challenge to make the right choice of Cortex core and turn the idea into reality. But a team of experienced professionals can take care of all the issues and implement concepts of any complexity.
Orient Display has focused on ARM processor-related technologies for many years, and has accumulated rich experience in the development and implementation of ARM architecture products. While continuously launching development platforms and core board that meet the general needs of the market, it also addresses the individual project needs of customers. Provide customized services.
Our hardware team can produce prototypes in the shortest time according to your design ideas and needs. Our software team can help you customize all the functions of the cutting driver layer.
Contact us and we will help to make your plans from initial idea to final product.
How to use Graphic LCD Displays with Raspberry Pi?
How to connect Graphic LCD to Raspberry PI?
The article shows how to hook up a 128×64 graphics LCD display to a Raspberry Pi.
LCD used is a 128×64 with LCD controller of ST7565. It can be powered directly from the Raspberry Pi 3.3V rail. It requires 5 GPIO pins for data.
The schematic is, CS (Chip Select), RST(Reset) and A0 (Register Select) can be connected to any 3 GPIO pins. In this example, 8,24 and 25 are default values. Different values can be specified as parameters when instantiating the ST7565 Python class. SCLK (Serial Clock) on the GLCD goes to GPIO 11 which is the Pi’s serial clock. SID (Serial Input Data) on the GLCD goes to GPIO 10 on the Pi which is MOSI. GPIO 10 and 11 must be used for SID and SCLK. Vdd is connected to a 3.3V pin on the PI and the grounds are also connected.
The LCD has a RGB backlight. The LED pins can go to GPIO’s 16,20 and 21. To control the color from the Pi, specifying RGB pins when instantiate the ST7565 class. The resistors must be placed in series to limit the current to prevent LED breakdown. The LED brightness can be changed by using different values of resistors. It will be best to adjust the current to be around 20mA, of course, different values will result in a different mix of colors. It is very difficult to mix a pure white color. Please calculate the resistor value carefully, at 40mA, the LED brightness will decrease sharply with time, with the current of close to 60mA, the LED might be breakdown and be permanently damaged.
How to program a Graphic LCD?
The display is 128 pixels horizontal by 64 pixels vertical. The LCD can be broken into 8 horizontal pages. They are numbered from 3 to 0 and 7 to 4 up to down. Each page includes 128 columns and 8 rows of pixels. To address the pixels, specifying the page and column number, and send a byte to fill 8 vertical pixels at once.
The display has SPI (Serial Peripheral Interface) to connect to Pi. SPI requires 3 lines MOSI, MISO and Clock. The Pi is the master and the GLCD is the slave. In this example, Only writing to GLCD and not ready, so the connection to MOSI and Clock lines are needed. MOSI is the output from the Pi to the GLCD and the Clock synchronizes the timing.
- Enable SPI on Raspberry Pi first
- From the raspi-config menu, select Advanced Options, then SPI. Then select Yes for “ Would like the SPI interface to be enabled”. Hit OK, Reboot. Select Yes for “ the SPI kernel module to be loaded by default”. Reboot the Pi after enabling SPI. Then test SPI using IsmodIt should return SPI_bcm2708 or spi_bcm2835 depending on the Pi version. The python SPI library requires python2.7 dev which can be installed with apt-get install:
- The Python SPI library is called py-spidev. It can be installed using git:GLCD Python library for the Pi can be downloaded from the GitHub site.
- The main ST7565 library (st7565.py) handles drawing, text & bitmaps, and a font module (xglcd_font.py) to load X-GLCD fonts. Here are the basic drawing commands which to create points, lines, rectangles, circles, ellipses, and regular polygons:For more details, please refer to the reference below or contact our engineers.
Getting started with projects based on STM32G071RB Board using STM32CubeIDE
Getting started with projects based on STM32G071RB Board using STM32CubeIDE
Check out our Control Board!
Getting started with a 32-bit ARM-based microcontroller is always a little daunting. There are too many of available microcontrollers, platforms, development boards, tools, and software. This note describes step by step how to begin a LED project.
Getting started: about Development Board STM32G071RB
Features:
- Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz
- Up to 128 Kbytes of Flash memory, 36 Kbytes of SRAM
- 7-channel DMA controller with flexible mapping
- 12-bit, 0.4 µs ADC (up to 16 ext. channels)
- Two 12-bit DACs, low-power sample-and-hold
- Two I2C, Four USARTs , one low-power UART , two SPIs
Getting started: Install STM32CubeIDE
You can download STM32CubeIDE from their st.com. It’ s free. Install STM32CubeIDE following STM32CubeIDE installation guide.
Your first project: LED blink
Before we can start writing code we need to create a project. This is similar to most other IDEs – projects are used to bundle together all of your settings, code, and definitions into a single collection all managed from the same application.
STEP 1: Start a new project, From the top left icon ( Or under the menu File > New > STM32 Project) to get started.
Step 2: Project name: G0_LED, then click Finish Button.
From schematic diagram that the LED4 is controlled by STM32G071 and the port is PA5.
Step 3: From System Core > SYS, select Serial Wire, setup PA5 as GPIO_OUTPUT.
Setup use label for PA5 as LED_GREEN as below:
Step 4: Then Generate code.
CubeIDE, which this functionality is developed upon, generates C files to work with under a Src directory, and puts a HAL (Hardware Abstraction Layer) into an Includes directory. It appears CubeIDE works the exact same way. Expand the folders on the right under the project view and see what it has generated to work for you.
Step 5: Let’ s add a smidge of C code of our own now! After the Infinite Loop area, we’re going to add code to toggle the LED under section 3 as below:
Compiling the project and downloading it to the board
STM32CubeIDE actually makes it pretty easy to compile our work and get it onto the STM32 chip. The first step is to produce the compiled .elf ( a binary version of our code). To generate the .elf, we need to do a build. This is as easy as pressing the build button on the toolbar.
Now, build information is presented in the console at the bottom of the screen.
Now what we want to do is send this compiled binary onto the STM32 microcontroller.
Let’s plug in the dev kit:
The Red power LED (to the left of the blue switch) is lit, as is the larger communication LED (by the USB cable). Inside STM32CubeIDE, select the run button.
This will open the Run dialog ( as it’s the first time we’ve run it). The settings we choose now will be saved as a run configuration which we can re-use or edit later.
Simply press Apply and then OK and the download will proceed. The Console will now fill with some interesting text:
The LED is on and off every 500ms. you’ve got everything set up.